SMPL Labjack T8 Analog Input PCB
This documentation covers The following part numbers:
Overview
The LabJack T8 Analog Input PCB is designed to breakout the analog output from
any SMPL PCB to a 2 position 0.2" pitch pin header compatible with the terminals
of a LabJack. This breakout features 8 solder jumpers that allow the complete
configuration of these 2 pins to any of the 4 pins on the SMPL connector.
Recommended Configuration
For use with the SMPL standard pinout for an analog follow the pin configuration below.
| SMPL Pin | PinHeader Postion |
| A | 1 |
| B | 2 |
Revisions
| Date | Changes |
| June 2024 | Initial Release |